This browser is no longer supported. Upgrade to Microsoft Edge or switch to a supported browser, like Chrome, Safari, or Firefox, to explore the MW Components website.

We're sorry for the inconvenience.

DSAC125-10-10 - 1.75 Inch 7075-T6 Aluminum Alloy Flexible Shaft Coupling

Machined coupling manufactured from 7075-T6 Aluminum Alloy with Integral Clamp end attachments. This 1.75 Inch flexible shaft coupling has a 1.25 Inch O.D. and 0.313 Inch and 0.313 Inch bores.

Unit System
View Spec Sheet
Specs (in standard)
Label Value
Angular Misalignment 3 deg
Axial Motion 0.008 in
Bore Size 0.313 in
Bore Size 2 0.313 in
Brand Helical Products
Center Line 0.22 in
Display Name DSAC125-10-10
End Type Integral Clamp
Finish Clear Anodized
Hex Size 0.1563 in
Inertia 0.98 lbin/sec sq
Length 1.75 in
Material 7075-T6 Aluminum Alloy
Max Torque 61 lbs/in
Model Number DSAC125-10-10
Non-Reversing Torque 31 lbs/in
Operating Temperature 200 F
Outside Diameter 1.25 in
Parallel Offset 0.01 in
Rate (Rotational) 0.062 lbf/deg
Rated Speed 10000 rpm
Reversing Torque 15 lbs/in
SKU DSAC125-10-10
Screw Size 10-24
Seating Torque 50 lbs/in
Series DSAC
Specs (in metric)
Label Value
Angular Misalignment 3 deg
Axial Motion 0.2 mm
Bore Size 7.95 mm
Bore Size 2 7.95 mm
Brand Helical Products
Center Line 5.59 mm
Display Name DSAC125-10-10
End Type Integral Clamp
Finish Clear Anodized
Hex Size 3.97 mm
Inertia 1.13 kgcm/sec sq
Length 44.45 mm
Material 7075-T6 Aluminum Alloy
Max Torque 10.68 N-mm
Model Number DSAC125-10-10
Non-Reversing Torque 5.43 N-mm
Operating Temperature 93.33 C
Outside Diameter 31.75 mm
Parallel Offset 0.25 mm
Rate (Rotational) 0.28 N/deg
Rated Speed 10000 rpm
Reversing Torque 2.63 N-mm
SKU DSAC125-10-10
Screw Size 10-24
Seating Torque 8.76 N-mm
Series DSAC

You May Also Like

Related Resources

View More Resources