This browser is no longer supported. Upgrade to Microsoft Edge or switch to a supported browser, like Chrome, Safari, or Firefox, to explore the MW Components website.

We're sorry for the inconvenience.

DSAC200-20-20 - 2.5 Inch 7075-T6 Aluminum Alloy Flexible Shaft Coupling

Machined coupling manufactured from 7075-T6 Aluminum Alloy with Integral Clamp end attachments. This 2.5 Inch flexible shaft coupling has a 2 Inch O.D. and 0.625 Inch and 0.625 Inch bores.

Unit System
View Spec Sheet
Specs (in standard)
Label Value
Angular Misalignment 3 deg
Axial Motion 0.008 in
Bore Size 0.625 in
Bore Size 2 0.625 in
Brand Helical Products
Center Line 0.26 in
Display Name DSAC200-20-20
End Type Integral Clamp
Finish Clear Anodized
Hex Size 0.1875 in
Inertia 9.5 lbin/sec sq
Length 2.5 in
Material 7075-T6 Aluminum Alloy
Max Torque 215 lbs/in
Model Number DSAC200-20-20
Non-Reversing Torque 108 lbs/in
Operating Temperature 200 F
Outside Diameter 2 in
Parallel Offset 0.01 in
Rate (Rotational) 0.02 lbf/deg
Rated Speed 10000 rpm
Reversing Torque 54 lbs/in
SKU DSAC200-20-20
Screw Size 1/4-20
Seating Torque 120 lbs/in
Series DSAC
Specs (in metric)
Label Value
Angular Misalignment 3 deg
Axial Motion 0.2 mm
Bore Size 15.88 mm
Bore Size 2 15.88 mm
Brand Helical Products
Center Line 6.6 mm
Display Name DSAC200-20-20
End Type Integral Clamp
Finish Clear Anodized
Hex Size 4.76 mm
Inertia 10.95 kgcm/sec sq
Length 63.5 mm
Material 7075-T6 Aluminum Alloy
Max Torque 37.65 N-mm
Model Number DSAC200-20-20
Non-Reversing Torque 18.91 N-mm
Operating Temperature 93.33 C
Outside Diameter 50.8 mm
Parallel Offset 0.25 mm
Rate (Rotational) 0.09 N/deg
Rated Speed 10000 rpm
Reversing Torque 9.46 N-mm
SKU DSAC200-20-20
Screw Size 1/4-20
Seating Torque 21.01 N-mm
Series DSAC