HR125-16-16 - 1.25 Inch 17-4 PH Stainless Steel Flexible Shaft Coupling
Machined coupling manufactured from 17-4 PH Stainless Steel with Set Screw end attachments. This 1.25 Inch flexible shaft coupling has a 1.25 Inch O.D. and 0.5 Inch and 0.5 Inch bores.
![](https://mwi.imgix.net/Category-Diagrams/hpc-beam-coupling-diagram.jpg?auto=format%2Ccompress&crop=focalpoint&fit=crop&fp-x=0.5&fp-y=0.5&ixlib=php-3.3.1&w=1280&s=b50c249e0469ac186c8c35ea38f5a614)
![](https://mwi.imgix.net/z-ProductImages/helical/2014/03/hr112.jpg?auto=format%2Ccompress&crop=focalpoint&fit=crop&fp-x=0.5&fp-y=0.5&ixlib=php-3.3.1&w=1280&s=edd6d03212cda8db1f69f5789bc61bf9)
Label | Value |
---|---|
Angular Misalignment | 5 deg |
Axial Motion | 0.01 in |
Bore Size | 0.5 in |
Bore Size 2 | 0.5 in |
Brand | Helical Products |
Center Line | 0.16 in |
Display Name | HR125-16-16 |
End Type | Set Screw |
Finish | None |
Hex Size | 0.1875 in |
Inertia | 19.4 lbin/sec sq |
Length | 1.25 in |
Material | 17-4 PH Stainless Steel |
Max Torque | 77 lbs/in |
Model Number | HR125-16-16 |
Non-Reversing Torque | 39 lbs/in |
Operating Temperature | 600 F |
Outside Diameter | 1.25 in |
Parallel Offset | 0.01 in |
Rate (Rotational) | 0.071 lbf/deg |
Rated Speed | 10000 rpm |
Reversing Torque | 19 lbs/in |
SKU | HR125-16-16 |
Screw Size | 1/4-20 |
Seating Torque | 65 lbs/in |
Series | HR |
Label | Value |
---|---|
Angular Misalignment | 5 deg |
Axial Motion | 0.25 mm |
Bore Size | 12.7 mm |
Bore Size 2 | 12.7 mm |
Brand | Helical Products |
Center Line | 4.06 mm |
Display Name | HR125-16-16 |
End Type | Set Screw |
Finish | None |
Hex Size | 4.76 mm |
Inertia | 22.35 kgcm/sec sq |
Length | 31.75 mm |
Material | 17-4 PH Stainless Steel |
Max Torque | 13.48 N-mm |
Model Number | HR125-16-16 |
Non-Reversing Torque | 6.83 N-mm |
Operating Temperature | 315.56 C |
Outside Diameter | 31.75 mm |
Parallel Offset | 0.25 mm |
Rate (Rotational) | 0.32 N/deg |
Rated Speed | 10000 rpm |
Reversing Torque | 3.33 N-mm |
SKU | HR125-16-16 |
Screw Size | 1/4-20 |
Seating Torque | 11.38 N-mm |
Series | HR |